[HOWTO] Eircom Netopia and DYNDNS.org

I just learned these routers have a hidden option for updating your dyndns account automatically!

You have to us telnet commands to activate it…

Open Telnet and open 192.168.1.254 (default router address)

Now use these commands to setup dyndns:

>configure
>set dynamic-dns option dyndns.org
>set dynamic-dns ddns-host-name myhostname.dyndns.org
>set dynamic-dns ddns-user-name myusername
>set dynamic-dns ddns-user-password myuserpassword
>save
>quit

Restart your router…wait about 2 mins then check the logs for this:

00:00:00:43 TR-069: ACS URL resolved
00:00:00:43 TR-069: Resolving ACS URL - Retry 0
00:00:00:41 DDNS: Hostname updated. good
00:00:00:37 NTP: Update system date & time
00:00:00:37 Daylight Saving Time enabled
00:00:00:32 DDNS: initializing service
00:00:00:32 ipcp: negotiated TCP hdr commpression off

Enjoy!

5 Comments

  1. […] from:  [HOWTO] Eircom Netopia and DYNDNS.org Tags: daylight-saving, eircom-netopia, folding, howto, plugin, plugins, plugins-used, […]

  2. Mahoo on 24th September 2009 at 10:44 am

    This worked a treat, even on the older Netopia routers [3347NWG, Green/Navy, Single Aerial]. Thanks for sharing 🙂

    – Mahoo

  3. Ianoo on 6th April 2010 at 1:19 pm

    Well done Simon. This has been breaking my melt!!! Now is sorted and fixed!! Many thanks.

  4. bowman on 2nd December 2010 at 6:56 am

    im getting error please help
    DDNS: initializing service
    12/2/10 01:34:58 AM L3 NTP: Update system date & time
    12/2/10 01:35:01 AM L3 DDNS: Hostname does not exist. nohost
    12/2/10 01:35:01 AM L4 TR-069: Resolving ACS URL – Retry 0
    12/2/10 01:35:01 AM L4 TR-069: ACS URL resolved

  5. Tony Corley on 20th December 2010 at 9:55 am

    Make sure you set the dns address in your dyndns.org account first, then configure and restart.

Leave a Comment